BX-30 Cable Knife |
BX-40 Cable Knife |
|
|
| For stripping the insulation layer of the cable between
F 15-30mm stripping thickness can be adjusted the knives cannot touch the metal cable cores when stripping knives can be sharpened or replaced.
Size:290*80*55mm
Weight: 0.69Kg
|
For stripping the insulation layer of the cable between F 15-40mm stripping thickness can be adjusted the knives cannot touch the metal cable cores when stripping knives can be sharpened or replaced.
Size:245*87*55mm
Weight: 0.63Kg |
KBX-45 Cable Stripper |
BX-90 Cable Stripper |
|
|
For stripping the end and the middle of the conducting wire and cable between
F 10-45mm stripping thickness can be adjusted the knives cannot touch the metal cable cores when stripping knives can be sharpened or replaced.
Size:245*80*90mm
Weight: 0.56Kg |
For stripping the end and the middle of the conducting wire and cable between F 40-90mm stripping thickness can be adjusted the knives cannot touch the metal cable cores when stripping knives can be sharpened or replaced.
Size:510*150*90mm
Weight: 2.50Kg |
DBX-65 Cable Knife for Stripping |
LBX/CX121 Cable Knife for Stripping |
|
|
For stripping the end insulation layer of the cable between F 15-65mm stripping thickness can be adjusted the knives cannot touch the metal cable cores when stripping knives can be sharpened or replaced.
Size:290*120*75mm
Weight: 1.42Kg |
For stripping the insulation layer,thickness less than F30mm,for stripping the main insulation layer of the power cable less than 4.5mm,Stripping thickness can be adusted.The knives cannot touch the metal cable cores when stripping,Knives can be sharpened or replaced.
Size:325*72*50mm
Weight: 0.87Kg |
SBX/CX119 Cable Stripping Tools |
|
|
|
For stripping the end insulation layer of the overhead power cable(below 10KV)between 35mm2-300mm2,stripping thickness can be adjusted.The knives cannot touch the metal cable cores when stripping,Knives can be sharpened or replaced.
Size:325*72*50mm
Weight: 0.87Kg |
Cutting Range: 240mm2 Max. Ratchet Cable Cutter has been adopted ratchet driving unit in order to be operated by one hand only, Only one hand could cut cables easily due to very light weight. The cutter is applicable for cutting cu/al cables, single strand or multi-strands of cables.
Length: 310mm
Weight: 0.55Kg |
