1.It is applicable to press connection of cable cooper and aluminum terminal bushing.
2.Hexagonal mould is adopted to ensure tight press connection, good electric conduction and non-easy shedding and heat conduction
3.With two stages and convenient for scavenge oil by adopting rotary-type extrusion mode
4.When the pressure reaches 700kg/cm2(12TON), safety pressure release firing pin will give out "crack" sound to warn the operator of stopping the operation
5.Fiberglass operating insulated bar can endure voltage 20kv for five minutes
6.Head part can rotate at 180 degrees
7.Packing mode adopts beautiful and practical plastic material boxes molded for one time
 |
Model: EP-510
1.Crimping range(mm 2 ):16-400
2.Crimping force:13
3,Stroke (mm):38
4.Oil capacity (cc): 220
5.Weight (kg):7.2
6.Standard dies(mm2):50,70,95,120,150,185,240,300,400
7.Packing&Size (mm):755*130*230
8.Hydraulic pressure oil:K32 |
 |
Model: EP-430
1. Crimping range(mm2):16-400
2.Crimping force:12
3.Stroke (mm):32
4.Oil capacity (cc): 145
5. Weight (kg):6.4
6.Standard dies(mm2)50,70,95,120,150,185,240,300,400
7. Packing&Size (mm):755*130*230
8.Hydraulic pressure oil:K32 |
 |
Model: EP-410
1.Crimping range(mm2):16-300
2.Crimping force:12
3.Stroke (mm):30
4.Oil capacity (cc): 145
5.Weight (kg):6.6
6.Standard dies(mm2)16,25,35,50,70,95,120,150,185,240,300
7. Packing&Size (mm):690*250*120 |
|
