|
|
|
| Electrical Crimping Tool, Pneumatic Crimping Tool, Battery Crimping Tool |
EM-6B2 Electrical Crimping Tool |
Product Description:
Type EM-6B2 is an ideal crimper for connection in cabinet. It is applicable for pre-insulated terminal crimping from 0.25mm2 to 10mm2 and Cu/AI cutting in 7mm. It is supplied with seven kinds of accurate and replaceable die sets. The crimper has high working efficiency and wide application.
The crimper is driven by fixed speed motor so that it owns advantages of high efficiency and high quality not only in crimping force but crimping speed. It is good for terminal crimping in large or medium quantity. If there are a lot of different kinks of terminals to be crimped, this crimper is the best choice.
Specification |
Model |
EM-6B1 |
EM-6B2 |
Output |
12.7KN |
12.7KN |
Max Crimping Force |
Insulated Terminal 5.5mm2 |
Insulated Terminal 5.5mm2 |
Crimping Time |
1.5s(60Hz) |
1.5s(60Hz) |
1.8s(50Hz) |
1.8s(50Hz) |
Volts |
AC100-125V |
AC200-230V |
Power Consumption |
90W |
90W |
Dimension |
325*265* 150mm |
325*265* 150mm |
Weight |
12Kg |
12Kg |
|
AM-10 Pneumatic Crimping Tool |
Product Description:
The machine is driven by dual-action normal cylinder,Which has advantages of high efficiency and quality in crimping force and speed.The machine is fit for crimping many kinds of terminals.The die sets are interchangeable with our manual crimping tools.So we can provide you all kinds of die sets for crimping.
Accessories:one die set,one foot air valve,two air pipes.
Specification |
Description |
AM-10 |
Range of Application |
Non-Insulated Terminal <= 10mm2 |
Insulated Terminal <= 6mm2 |
Wire-end ferrules<= 25mm2 |
Output force |
13.5KN |
Application air pressure |
0.4-1Mpa |
External Dimension |
260*120* 140mm |
Weight |
4Kg |
 AM-10 Pneumatic Crimping Tool Operation Instruction on AM-10 Crimper
|
|
|
|
|
|
