HSC8 6-6 Plier design is unique due to light weight and saving energy. When crimping tightly, the grippimg force would evenly transfer to all the section(4 or 6 spots) of crimping terminal. Because of reasonalbe design complied with human being engineering principle, the weight of the pliers is only 360g and the length of the pliers body is only 175mm.

HSC8 16-4 Plier is applicable for tubular bare terminals and pre-insulated terminal on non-welding connection complied with standard electrical connection. When crimping, the terminal should be put into crimping pliers laterally. The demanded pressing force must be reached before the brake unit automatically release the jaw of the pliers. Thus high quality crimping standard could be ensured during repeatedly crimping.

HSC8 1-4 is applicable for special terminals in 0.08-4mm2 on non-welding connection complied with standard electric connection. When crimping, put the terminals into the crimping pliers laterally. When the demanded pressing force is reached, the brake unit would release the crimping jaw automatically. Thus it could ensure high quality crimping standard after repeatedly crimping.

608-400 Crimper used for crimping turned contacts, with four-mandrel crimping for exact crimping performance.The meterial all stressed parts are made of special steel and are specially hardened and tempered.